10PC CERAMIC NOZZLES ( ORIGINAL SANDBLASTKIT )

KEEP THE BLAST GOING!

NOTE: These nozzles are meant for the ORIGINAL SANDBLASTKIT only!

Continue blasting rust and paint off with your wet sandblasting kit. Each ceramic nozzle is good for up to 3 uses. Simply replace the ceramic nozzle from your wet sandblasting kit to ensure the efficiency of your wet sandblasting kit. 



WHEN SHOULD YOU CHANGE YOUR   NOZZLE: 

AS SOON AS YOUR NOZZLE HAS BEEN CHIPPED AWAY BY THE PRESSURE OF THE WATER AND SAND MEDIUM 

WORN-OUT NOZZLES CAUSE:

  • Overall pressure loss
  • A decrease in the speed of the abrasive particles coming from the nozzle by up to 235 mph (slower)
  • Halving productivity
  • The costly waste of sand
  • Clean-up costs

 

HOW TO INSTALL: 

How to change your   nozzle:    Now you know how important it is to continuously change your nozzle. Below are some step-by-step photos demonstrating the process of changing your nozzle.



 

              


  • Remove the blasting nozzle from the wand to remove the old ceramic nozzle inside.
  • Insert the new ceramic nozzle and re-attach the blasting nozzle on the wand.

SPECIFICATIONS:

  • Max Pressure:  4000psi
  • Max Temperature:  60oC / 140oF